Liftmaster 888LM MyQ Control Panel Bedienungsanleitung PDF herunterladen

MyQ

CONTROL PANEL

MODEL 888LM

To prevent possible SERIOUS INJURY or DEATH from electrocution:

• Be sure power is NOT connected BEFORE installing door control.

• Connect ONLY to 7-28 VOLT low voltage wires.

To prevent possible SERIOUS INJURY or DEATH from a closing

garage door:

• Install door control within sight of garage door, out of reach of

children at a minimum height of 5 feet (1.5 m), and away from ALL

moving parts of door.

• NEVER permit children to operate or play with door control push

buttons or remote control transmitters.

• Activate door ONLY when it can be seen clearly, is properly

adjusted, and there are no obstructions to door travel.

• ALWAYS keep garage door in sight until completely closed. NEVER

permit anyone to cross path of closing garage door.

• DO NOT install this door control on garage door opener systems

controlling one-piece or swing doors.

To provide an adequate visual alert, the garage door opener light

bulb(s) MUST be a minimum of 40 Watt (or equivalent).

The MyQ

Control Panel is intended to be installed with Security✚™

Garage Door Openers manufactured between 1998 and present. The

MyQ

Control Panel is NOT compatible with Security✚ 2.0™ Garage Door

Openers. DO NOT install this door control on garage door opener

systems controlling one-piece or swing doors.

APPLICATION

The MyQ

Control Panel offers a quick and convenient way to add

Security✚ 2.0™ and MyQ

technology to your existing garage door

opener. MyQ

technology uses a 900MHz signal to provide two-way

communication between the garage door opener and MyQ

enabled

accessories. When programmed to the Liftmaster

Internet Gateway you

can monitor and control your garage door from any internet enabled

computer or smartphone. You may program up to 12 Security✚ 2.0™

remote controls, 2 Security✚ 2.0™ keyless entries and a combination of

16 MyQ

accessories to the MyQ

control panel.

COMPATIBLE ACCESSORIES

Security

✚

2.0™ Accessories: MyQ

Accessories:

Model 891LM

1- Button Remote Control

Model 823LM

Remote Light Switch

Model 893LM

3-Button Remote Control

Model 825LM

Remote Light Control

Model 890MAX

3-Button Mini MAX Remote Control

Model 828LM

LiftMaster

Internet Gateway

Model 893MAX

3-Button MAX Remote Control

Model 829LM

Garage Door and Gate Monitor

Model 895MAX

3-Button Premium MAX Remote

Control

Model 877LM

Wireless Keyless Entry

Model 877MAX

Wireless MAX Keyless Entry

OVERVIEW

Install the MyQ

Control Panel in place of the existing door control. Due

to power consumption the MyQ

Control Panel cannot be used in

conjunction with another wired door control connected to your garage

door opener. If an additional door control is needed, the wireless door

control model 885LM can be programmed to the MyQ

Control Panel.

To program the 885LM to the MyQ

Control Panel, follow the remote

control programming steps. When in battery back-up mode, any feature

using unattended operation such as Timer-to-Close, closure from a

garage door and gate monitor or remote operation utilizing the

LiftMaster

Internet Gateway will be disabled.

1. Disconnect all electrical and battery power (if applicable) to the

garage door opener.

2. Remove the existing door control from the wall.

3. Note the polarity of the wires connected to the existing door

control.

• Label the wire connected to the RED terminal.

• Label the wire connected to the WHITE terminal.

Disconnect the wires from the existing door control.

INSTALLATION

Existing Door Control

Discard, donate

or recycle

Wire from

RED terminal

Connect

RED wire to

R terminal

Wire from

WHITE

terminal

Connect

WHITE

wire to W

terminal

MyQ

Control Panel

4. Connect the wires to the new MyQ

Control Panel. Make sure the

polarity is correct.

• Red wire to the R terminal.

• White wire to the W terminal.

5. Mount the MyQ

Control Panel to the wall.

6. Reconnect power. The yellow command LED and the red learn LED

will blink quickly for up to 5 minutes as the control panel

recharges. When the control panel is operational, the yellow

command LED will glow steadily.

7. To test the control panel, press the push bar to activate the garage

door opener.

1 2 3 4 5 6 ... 11 12

Inhaltsverzeichnis

Seite 1 - CONTROL PANEL

1MyQ® CONTROL PANEL MODEL 888LMTo prevent possible SERIOUS INJURY or DEATH from electrocution:• Be sure power is NOT connected BEFORE installing door

Seite 2 - PROGRAMMING

10PIN?? ??PROGRAMACIÓNCONTROL REMOTO1. Presione dos veces el botón PROGRAMAR (LEARN) del panel de control MyQ® ; el LED de programación rojo se encen

Seite 3 - FUNCTIONS

11BARRA DE EMPUJEPresione la barra de empuje para abrir/cerrar la puerta.LUCESOprima el botón "LIGHT" para encender o apagar las luces del a

Seite 4 - TROUBLESHOOTING

MARQUE NUESTRO NÚMERO GRATUITO PARA RECIBIR SERVICIO:1-800-528-9131www.liftmaster.comUN AÑO DE GARANTÍA LIMITADAThe Chamberlain Group garantiza al pri

Seite 5 - PANNEAU DE COMMANDE MyQ

2PIN?? ??PROGRAMMINGREMOTE CONTROL1. Press the MyQ® Control Panel LEARN button twice, the red learn LED will turn on.2. Press the button on the remo

Seite 6 - PROGRAMMATION

3PUSH BARPress the push bar to open/close the door.LIGHTSPress the LIGHT button to turn the garage door opener lights on or off. When the lights are t

Seite 7 - FONCTIONS

4FOR SERVICE DIAL OUR TOLL FREE NUMBER:1-800-528-9131www.liftmaster.comONE YEAR LIMITED WARRANTYThe Chamberlain Group, Inc. warrants to the first cons

Seite 8 - DÉPANNAGE

5PANNEAU DE COMMANDE MyQ® MODÈLE 888LMPour éviter le risque de BLESSURES GRAVES ou LA MORT par électrocution :• Veillez à couper le courant AVANT d&a

Seite 9 - PANEL DE CONTROL MyQ

6NIP?? ??PROGRAMMATIONTÉLÉCOMMANDE1. Appuyez deux fois sur le bouton LEARN (apprentissage) du panneau de commande MyQ®. Le témoin DÉL d'apprenti

Seite 10 - PROGRAMACIÓN

7BARRE DE POUSSÉEAppuyez sur la barre de poussée pour ouvrir ou fermer la porte.ÉCLAIRAGEAppuyez sur la touche Éclairage (LIGHT) pour allumer ou étein

Seite 11 - FUNCIONES

8COMPOSEZ LE NUMÉRO SANS FRAIS SUIVANT POUR LE SERVICE CLIENTÈLE :1-800-528-9131www.liftmaster.comGARANTIE LIMITÉE D’UN ANLa société Chamberlain Group

Seite 12 - SI TIENE ALGÚN PROBLEMA

9PANEL DE CONTROL MyQ® MODELO 888LMPara evitar la posibilidad de una LESIÓN GRAVE o INCLUSO LA MUERTE por electrocución:• Asegúrese de que la alimen

Kommentare zu diesen Handbüchern

Keine Kommentare

Liftmaster 888LM MyQ Control Panel Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Sicherheit Liftmaster 888LM MyQ Control Panel herunter. LiftMaster 888LM MyQ Control Panel User Manual [de] Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheit Liftmaster 888LM MyQ Control Panel