Liftmaster HomeLink Repeater Kit Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für Zuhause Liftmaster HomeLink Repeater Kit herunter. LiftMaster HomeLink Repeater Kit User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 1
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
RATING: 120 Vac, 60Hz, 35mA
INSTALL AND PROGRAM THE HOMELINK
®
REPEATER
To prevent possible SERIOUS INJURY or DEATH from a
moving gate or garage door:
ALWAYS keep remote controls out of reach of children.
NEVER permit children to operate, or play with remote
control transmitters.
Activate gate or door ONLY when it can be seen clearly, is
properly adjusted, and there are no obstructions to door
travel.
ALWAYS keep gate or garage door in sight until completely
closed. NEVER permit anyone to cross path of moving gate
or door.
HOMELINK
®
REPEATER KIT
INTRODUCTION
The HomeLink
®
Repeater Kit is designed to allow compatibility
between a new Chamberlain, Sears Craftsman, or LiftMaster*
garage door opener and the HomeLink
®
system in your vehicle.
Refer to the your vehicle owner’s manual for specific instructions
on programming the HomeLink
®
system. Your model may look
different than illustrated in this programming guide.
* Chamberlain and LiftMaster are Trademarks of Chamberlain Group. Sears is a Trademark of
Sears Roebuck.
NOTICE: To comply with FCC and or Industry Canada (IC) rules, adjustment or modifications of this
receiver and/or transmitter are prohibited, except for changing the code setting or replacing the
battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.
Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
© 2012 The Chamberlain Group, Inc.
114A4226B All Rights Reserved
1-800-355-3515
www.homelink.com
Antenna Indicator Light
HomeLink
®
Repeater
Be sure that your vehicle is parked outside of the garage before
programming the HomeLink
®
Repeater Kit. Two people may be
needed to program the HomeLink
®
system.
1. Program the new remote control
included with the HomeLink
®
Repeater Kit to the Homelink
®
button in your vehicle. Refer to
the owner’s manual for your
vehicle for programming steps.
2. Plug the HomeLink
®
Repeater
into a 120 Vac polarized outlet,
located as close as possible to
your garage door opener.
3. Straighten the antenna.
4. Press and release the YELLOW
Learn button on the garage door
opener. The Learn LED will glow
steadily.
5. Within 30 seconds press and
hold the programmed
HomeLink
®
button in your
vehicle.
6. Release the HomeLink
®
button
when the garage door opener
light blinks. If light bulbs are
not installed in the garage door
opener, two clicks will be heard.
Programming is complete.
7. To ensure the garage door
opener operates from the
HomeLink
®
button, press the
programmed HomeLink
®
button
in the vehicle. If it does not
operate the garage door opener,
repeat the steps.
Remote Control
NOTES:
If you are using the HomeLink
®
Repeater with a garage door
opener that has a Battery Backup system, ensure the original
remote control is programmed to the garage door opener and
place it in your glove box for use in the event of a power
outage.
The remote control included in this Repeater Kit MUST be kept
for future programming (i.e. a new vehicle, a new garage door
opener, etc.).
Seitenansicht 0
1

Inhaltsverzeichnis

Seite 1 - REPEATER KIT

RATING: 120 Vac, 60Hz, 35mAINSTALL AND PROGRAM THE HOMELINK® REPEATERTo prevent possible SERIOUS INJURY or DEATH from amoving gate or garage door:•

Kommentare zu diesen Handbüchern

Keine Kommentare